Aluminum Road Stud – Cat Eye
Aluminum body with strong compression resistance.
Standard: EN1463
Type: One Side, Two Side
Material: Aluminum alloy
Dimension: 100x100x20mm
Weight: 0.338kg
Colour Available: yellow/white
Resistance: IP 68
Installation:
> Placing security isolation facilities for installation work is most important and must not be ignored. In the whole process of dynamic construction, no matter in a new closed road or a running road, every installer shall be in the isolation area.
> If in a running road, the ratio between security personnel and the installing personnel shall be 1:1; If in a closed road, 1:3.
> Locate the installing position and ensure it is flat. For curving, cracked or uneven pavement, straighten it prior to installation.
> Clean the installation location with a brush, meanwhile ensure the location is dry.
> Glue the road stud thoroughly with the proper amount of epoxy glue.
> Firmly mount the stud on the fixing location & ensure the reflective part is facing the right traffic direction. Do clean the spilled epoxy glue if excessive amount is used.
> Inspect the installed studs within 2hrs after installation, ensuring that all the studs are fixed in correct direction or not crooked.
> Remove the isolation facilities in 4hrs after the stud’s installing glue is thoroughly cured.
Contact Us:
Three Colours Safety Eqpt Trd LLC
Sharjah UAE
Tel: +97165669554
WhatsApp: +971559680202
Mail Us: info@tcgroupuae.com
