Bulldozer Fireman Suit
Specification – General
- Outer Shell Material: 100% Nomex111 a Plain Weave Fabric
- Inner Shell: NOMEX 111A 65% FR Rayon 35% Plain Weave Fabric, PTEE Film with laminating
- Inner Shell for Quilting: NOMEX 111A 65% FR Rayon 35% Plain Weave Fabric
- Inner Shell for Padding: NOMEX 111A 65% FR RAYON 35% Weave Fabric and quilted with NOMEX 111A Pad
- Cuff: 100% NOMEX 111A
- Sewing Thread: 100% NOMEX 111A
The clothing consists of ¾ length of Jacket and Trousers. The suit’s make is: outer fabric in (Dark Blue / Black / Yellow color) with insulating layer. All the layers of the Jacket shall be bound together permanently and made from layers which are worn together
The Jacket has wide sleeves that enable to put on naturally and prevent the sleeves to be pulled up to the top when the wearer raise his arms.
The Jacket has closure with sturdy zipper open to the level of the crotch. In the bottom part of the Jacket, there are two pockets. These can close with a flap with “Velcro” closing mechanism.
In the upper part on the right breast there is a pocket fastened with a zipper in the direction of the arm. Directly under the warning tapes, there are 2 badges, and a yoke made from outer fabric. The yoke has fastening system of “Velcro” tape for sticking a torch, signaling device without motion or Gloves.
Upper
In the upper part of the Jacket, under the left pleat covering a zipper, a pocket is provided fastened with a spiral zipper
In the front inner bottom of the Jacket, one or two pockets are with “Velcro” tape, foreseen for personal bandage
The trousers have elastic braces fastened with a snapped buckle that enables regulation of the length. To the level of the knee an insert additionally sewn protecting the knee joint. All sizes of legs can easily place inside the Trousers.
In order to improve water resistance in the clothing, seams can secure by tape or in other equivalent way.
*Brand Names, Terminologies mentioned above are of respective brand owners
Contact us for order or click here to Buy Online
